+8616678988715 Mon - Fri 09:00 - 17:00 100 Meter North To East Liuting Industrial Park Overpass
+8616678988715 Mon - Fri 09:00 - 17:00 100 Meter North To East Liuting Industrial Park Overpass
Ceritified
ISO 9001, 16949, ESD
The Best
#1 in China
Number #1
PCBA MANUFACTURER
Get A Quote

How to Replace a Refrigerator Electronic Control Board



This video from Sears PartsDirect shows how to replace an electronic control board in a top-freezer refrigerator. When the electronic control board senses the compressor needs to operate it sends voltage to the compressor and fans to begin the cooling cycle. The control board receives input from temperature sensors to monitor the temperatures inside the refrigerator and freezer sections. With this information, the electronic control board controls the defrost cycle. If your refrigerator doesn’t cool as well as it should or won’t power up at all, you may need to replace the electronic control board.

Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:how-to-replace-a-refrigerator-electronic-control-board

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts. Look up your model to make sure you get the right parts for your refrigerator.
Electronic control board
https://www.searspartsdirect.com/part-number/5304501856/0046/253.html?sid=soc:youtube:direct-part-link

Find parts for your refrigerator at:
https://www.searspartsdirect.com/partsdirect/product-types/Refrigerator-Parts?sid=soc:youtube:refrigerator-parts?sid=soc:youtube:refrigerator-parts

Or click here to schedule an appointment with a repair technician.
https://www.searshomeservices.com/repair#showall

Transcript:
When the electronic control board senses the compressor needs to operate it sends voltage to the compressor and fans to begin the cooling cycle. The control board receives input from temperature sensors to monitor the temperatures inside the refrigerator and freezer sections. With this information, the electronic control board controls the defrost cycle. If the control board is defective, replace it using the steps in this video. Before you begin, wear work gloves to protect your hands. Unplug the power cord from the wall outlet. Remove the screw that secures the control box to the ceiling. Pull the control box down and unplug the wire harness. Pry out the two locking tabs and release the electronic control board housing. Turn the housing over to access the electronic control board. Pry out the small locking tab and release the electronic control board from the housing. Disconnect the wires from the old electronic control board and remove it. Connect the wires to the new electronic control board. Flip the board over and snap it into the housing. Position the electronic control board housing in the control box and snap it into place. Plug in the control box wire harness. Line up the drain tube spout at the back of the control box with the drain hole in the upper back wall and snap the control box in place. Reinstall the screw that secures the control box. Plug in the refrigerator to restore power.

source

About the author

Leave a Reply

Text Widget

Nulla vitae elit libero, a pharetra augue. Nulla vitae elit libero, a pharetra augue. Nulla vitae elit libero, a pharetra augue. Donec sed odio dui. Etiam porta sem malesuada.

Recent Works

Recent Comments