- 2-40 Layers
- Quick Turns
- Mass Production
- Domestic & Off Shore Production
- Military & Aerospace
- IPC-600 Class III Production
- 3mil Trace & Space / All Surface Finishes
- Heavy Copper / Controlled Impedance & More
Not every circuit board supplier and its products is created equal. That is why PCB Solutions only sources printed circuit boards from the highest quality PCB manufacturers to make sure our customers can count on the highest quality product on every order. PCB Solutions offers ALL types of high quality and aggressively priced printed circuit boards ranging from two layer to forty layer (2-40 Layer).
- Quality Control
- Lead Time
- Production Capabilities
- Surface Finishes & Materials
- Inspection
Quality Controls:
- All suppliers have UL certifications and ISO Certifications
- All suppliers work to IPC standards ( IPC 600 Rev H www.ipc.org )
Testing: PCBs are tested at the highest level which includes but is not limited to:
- Automated Optical Inspection (AOI)
- Electrical Test (E-Test/100% Net List Test)
- High Pot Testing Available
Documentation: Each Shipment of PCBs include the following documentation:
Documentation: Each Shipment of PCBs include the following documentation:- Certificates of Conformance (CofC)
- Electrical Test Certificates
- Cross Section Analysis
- High Pot Test Certificates
- Solder Samples (included upon request)
Domestic:
Prototypes
Prototypes- Double Sided: 24-48 Hours + Transit (cut off 9:00 a.m. PST)
- Multilayer: 24-48 Hours + Transit (cut off 9:00 a.m. PST)
Pre-Production
- Double Sided: 3-4 Days + Transit
- Multilayer: 4-5 Days + Transit
Off Shore:
Prototypes
- Double Sided: 3 Days + 2 Day Transit
- Multilayer: 4 Days + 2 Day Transit
Pre-Production
- Double Sided: 4-5 Days + 4 Day Transit
- Multilayer: 5-6 Days + 4 Day Transit
Mass Production
- Repeat P/Ns: 2-3 Weeks + 6-8 Day Transit
- New P/Ns: 2-4 Weeks + 6-8 Day Transit
Standard Circuit Boards
- Single Sided
- Double Sided
Multilayer
- 4-20 Layer Boards
- 003″ Line Width
- 003″ Air Gap
Minimum Circuit Board Thickness
- .008″ (2 layer)
- .016″ (4 layer)
- .016″ +/- 0.004″ (6 layer)
- .032″ +/- 0.004″ (8 layer)
Maximum Circuit Board Thickness
- .276″
Aspect Ratio
- Up to 22:1
Maximum Panel Size
- 23″ x 35″
Minimum Finished Hole Size
- .008″
Controlled Impedance
- Differential
- +/- 10%
- Blind Vias
- Buried Vias
- Micro Vias
Fabrication
- N/C Routing
- V-Scoring/Punching
IPC-A-600 Rev G
Surface Finishes
- Hot Air Solder Level (HASL)
- Pb-Free HASL or Lead Free
- Entek
- Immersion Gold (ENIG) 2-5u”
- Immersion Silver
- Electro-Plated Gold (HARD)
- Carbon Ink
- Gold Fingers (>30u”)
- OSP
Solder Mask
- LPI Standard
Board Materials
- FR-4 (130°C Tg)
- FR-406 (170°C Tg)
- CEM
- Rogers
- Teflon
- Polyimide
- BT Resin
Inspection
- Automated Optical Inspection (AOI)
- Outgoing Inspection Reports
- Electrical Test
- Flying Probe Test
- (E-Test/100% Net List Test)
- High Pot Testing Available
- IPC 600 Rev H
Dawei PCB has suppliers that can produce complex quick turn prototype PCBs and high volume printed circuit boards suppliers that have been in business for more than 15 years. We have suppliers that use laser – direct imaging, laser drilling and contouring, high layer count lamination processing equipment, pulse plating equipment and other specialized equipment for simple and complex PCB designs.
The use of this specialized PCB Fabrication equipment allows for up to 40 layer rigid boards with 3 mil line / spacing and up to 20 layer Rigid Flex Circuits. Impedance controlled designs, backplane PCBs (thicknesses of up to .276 {7 mm}), aspect ratios of 22:1 are produced regularly at our factories.
Our Advanced Technology Boards include, but are not limited to the following: High TG Circuit Boards, Backplanes, High-frequency boards, Halogen-free boards, Flexible and Rigid-Flex boards, Hybrids, HDI boards… See our production specifications below.